XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

[Copy the Link] Views:1026 | Replies:3
Post on July 22,2017 07:21#1
Hello! I bought this product in early summer on a preorder for $ 6.5. Now the price is $ 9.99, and there is an opportunity to apply a coupon for a 15% discount or use points.

Characteristics indicated on the website:
Black color
Material: ABS
Weight: ~ 118g
Light: XPG + 2 LED
Battery Capacity / Type: 1200mAh Li-pol Battery
Lighting distance: 50-100m
Switch type Upper switch
Charging via micro-usb interface
Charging time: 1.5-2.5h
Waterproof: IPX-5
Illumination 600 lumens

5 Modes
1 - Smart Sensor Mode  
2 - Red Light 
3 - Power Saving Light + Day Light (400LM)
4 - Strong Light + Day Light (600LM)
5 - Slow Flash 

Packing and equipment
Set:
- Light
- Mounting on the steering wheel;
- Cable micro-usb;
- Documentation.
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

Mounting on the steering wheel is made of plastic with a rubber insert. To release the headlight is a special pedal-tongue (Push down and push the lantern from yourself)
The fastening of the headlight is quick-detachable. To do this, it is sufficient to wrap the rubber insert around the handlebars and secure it using one of the 4 holes.

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
To charge the flashlight, use a micro-usb cable. A 50cm long cable is included.

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

To charge the lamp, it is necessary to remove the rubber insert, which serves to protect the connector.
During charging, a red light is on.

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
The green indicator indicates that the lamp is fully charged.

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
Instructions
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
Appearance
Dimensions of the headlamp (maximum): length - 70 mm., Width - 40 mm., Height - 20 mm. Behind the headlight is a rubber cap of the USB port. At the top there is a power button, Smart light sensor and charge indicator.

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
From below is a fastening mechanism and 4 screws for disassembling the lantern.
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
Turn on / off the flashlight by pressing the orange button with a duration of ~ 1,5 s. After switching on the lamp starts working in the automatic lighting level. The blue indicator lights up. The very definition of the level of illumination is carried out with the help of a sensor.
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

Light level 2 modes, low and high
XANES SFL-01 600LM XPG + 2 LED Bicycle FlashlightXANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

Disassembly
To disassemble the lamp, it is necessary to unscrew the 4 screws and then simply move apart the housing parts.

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight
XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

XANES SFL-01 600LM XPG + 2 LED Bicycle Flashlight

And finally a small video modes of operation. The mode of red glow was not really visible on the video.




I was pleased with the purchase.
Thank you all for attention!

Report a Post Quote Reply
Post on January 01,2018 10:43#2
Hi

Does enyone know if it's possible to disable shock sensor? Because my lamp turns off itself while riding in "50% mode".
Report a Post Quote Reply
Post on November 12,2018 14:32#3
Is it possible to disable the shock sensor (aka inactivity sensor)? It keeps turning off my bike light even if I'm riding. This is very dangerour especially in the middle of the road
Report a Post Quote Reply
Post on December 16,2018 23:28#4
Yes, you have to move wire closer to arounding spring or just link them together.
Report a Post Quote Reply
Subject:
Message:(5 words at least)
Subject:
Question Topic: